Cleaning - Tektronix Phaser 360 Service Manual

4
Key Operator Training

Cleaning

4-4 Phaser 360 Color Printer
Ink sticks: Demonstrate how to load an ink stick.
Emphasize to customers to use only Phaser 360 ink sticks. Also
emphasize that they should not use ink sticks that have large pieces
missing and not to load any small broken pieces.
Show where ink stick handling and loading instructions are explained
in the user manual and on the ink stick card shipped with each ink
stick box.
Emphasize to the user never to load used waste ink from the waste
tray in the ink loader. This will damage the printhead and violate the
printer warranty.
Explain how keeping the printer clean can ensure the highest-quality prints.
Emphasize how dirt and dust can affect print quality and paper-pick reliability.
Stress the importance of using 90% or higher isopropyl alcohol, not
rubbing alcohol. Note that rubbing alcohol can be used only if it only
contains 90% or higher isopropyl alcohol with the remainder
deionized water; it should contain no oils or lanolin.
Stress the importance of not printing on both sides of the media; doing
so will offset ink inside the printer, requiring subsequent cleaning to
be performed.
Explain the contents and use of the cleaning kit.
Show how to use the user manual to locate proper cleaning
procedures. Demonstrate the use of the front panel menu to initiate
cleaning routines.
Show the location of the paper feed rollers inside the printer and
inside the front cover.
Show the location of the exit cover release button inside the front
cover and the surfaces that will require cleaning inside the exit cover.