Using The Windows Nt 3.51 Postscript Driver; Using The Windows Nt 4.0 Postscript Driver - Tektronix PHASER 380 User Manual

Printing Basics
3

Using the Windows NT 3.51 PostScript driver

Using the Windows NT 4.0 PostScript driver

Phaser 380 Color Printer
3-12
If you are using Microsoft Windows NT, follow the instructions in
ÒInstalling printer software for Windows NT 3.51Ó on page 2-38 to install a
Windows NT PostScript driver with a Phaser 380 printer. You can select
printer page sizes in the driver for Windows NT applications, however,
TekColor color corrections and other PostScript Level 2 features are not
supported by the Windows NT driver. Refer to page 3-24 for instructions on
selecting color corrections from the printerÕs front panel or from
downloadable utility Þles. Refer to your Microsoft Windows NT
documentation for details on features in the Windows NT driver.
Setting up installed options
If you are not sure which printer options you have installed, the
Note
printerÕs Startup Page lists some of this information, such as
SCSI hard disks. You can print a copy of the Startup Page from
the printerÕs front panel.
From the Properties dialog box, click the Device Settings tab.
1.
In the Device Setting sheet, scroll to the end of the list to
2.
Installable Options.
Under Installable Options, highlight Optional Lower Tray.
3.
In the box that appears at the bottom of the window, click
4.
Installed.
Select other options you have installed.
5.
Click OK to return to the Control Panel.
6.