Setting Up The Printer On A Network (Windows Nt 3.5 And 3.51); Tcp/Ip Connection - Tektronix PHASER 560 Service Manual
Hide thumbs
Also See for PHASER 560:
- User manual (259 pages) ,
- Service manual (228 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
2
Installing the Printer and Drivers
Setting up the printer on a network (Windows NT 3.5 and 3.51)
2-32
Phaser 560 Color Printer
Downloaded from
www.Manualslib.com
TCP/IP connection
Note
Windows NT 3.5 and 3.51 include network software called TCP/IP
print services (for TCP/IP; lpr print services). Refer to the Windows
NT manual for instructions on installing this network software.
After this software is loaded, follow these steps:
1.
Select Create a new printer in the Print Manager; select the
appropriate printer driver.
2.
Select Other in the Print to field of the From the Printer Properties
dialog box.
3.
Select LPR Port for Available Print Monitors; click OK.
4.
For Name or address of host providing lpd, type the printer's IP
address (or Host name if known to the network).
Note
The printer's IP address may be available on the printer's
Configuration Page. If not, ask the network administrator.
5.
For Name of printer on that machine, type in one of the following
(use capital letters):
PS
for PostScript
AUTO
for automatic selection
6.
Click OK to complete the installation.
manuals search engine
Advertisement
Table of Contents
