Front Panel; Figure 1-11 Printer Front Panel - Tektronix Phaser 360 Service Manual

1
General Information

Front panel

1-14 Phaser 360 Color Printer
These front panel features are found on the printer:
A two-line, 24-character LCD
Four push buttons
Two LEDs
LCD. The backlit LCD serves two purposes: displaying current image processor
and print engine status information and displaying an interactive menu. Status
information includes image processor status such as Ready , Receiving data
and Printing . Print engine status includes messages such as Out of paper ,
Paper Jam , Add ink and error codes.
The interactive menu can only be entered while the printer is idle and ready.
Customers can review and modify certain NVRAM, I/O ports and peripheral
parameters. Using the front panel to review and change parameters is discussed
in the topic, "Check and Adjustments."
Buttons. Button 1, the left-most button, is an Exit key used to cancel an operation
while in the interactive menu. The functions of buttons 2, 3 and 4 are defined by
the particular menu or function being displayed on the LCD. The bottom row of
the LCD labels the current function of each button.
In addition, pressing the buttons as you turn on the printer enables certain
diagnostic modes.
Pressing and holding Button 1, as you turn on the printer, skips
power-up self-tests. Refer to Table 6-1, "Main board power up
self-test error codes," on page 6-3.
The topic "Resetting NVRAM" on page 9-17 explains how to use the front panel
buttons to reset the NVRAM to its factory default values.
Ready
Info
Exit

Figure 1-11 Printer front panel

Clean Menu
9923-08