8
Field Replaceable Unit Disassembly/Assembly
Network card
8-62
Phaser 360 Color Printer
1.
Power down the printer. Leave the power cord plugged in to provide
a ground path for static discharges. Remove the interface cable.
2.
Loosen the two securing screws holding the Phaser Share network
card and remove it.
3.
Slide in the replacement network card and tighten the two thumb
screws.
Figure 8-39 Installing the network card in the printer
4.
Reconnect the interface cables. Turn on the printer and print the
configuration page; it lists information regarding the Ethernet
interface.
5.
For installations of a new Ethernet card, affix the Ethernet address
label to the underside of the top cover where it can easily be accessed.
e t®
e rn
E th
Network card
9923-65