Figure 6-8 Running A Test - Tektronix Phaser 360 Service Manual

5. Once selected, press Ctrl-R to start the test(s) specifying the number of
test cycles to run. The tests run in the order they appear in the menu.
Depending on the test, a screen may be displayed to modify how the
tests run.

Figure 6-8 Running a test

The solenoid and clutch test, shown above, allows you to selectively actuate a
printer solenoid or clutch as well as the drum fan.
Note
Some test groups have a Choices option which allows for specification
or selection of parameters which may influence the operation of
sucessive test in the current test group. The selections are lost when
another test group is loaded.
Troubleshooting
Service Manual 6-37
6