Appletalk Connection - Tektronix Phaser 360 Service Manual

AppleTalk connection

Note Windows NT 3.5 and 3.51 include network software called Services
for Macintosh (AppleTalk) and TCP/IP print services (for TCP/IP;
lpr print services). Refer to the Windows NT manual for instructions
on installing this network software. After this software is loaded,
follow these steps:
1. Select Create a new printer in the Print Manager; select the
appropriate printer driver.
2. Select Other in the Print to field of the From the Printer Properties
dialog box.
3.
Select AppleTalk Printing Devices for Available Print Monitors; click
OK.
4. Double-click on the appropriate zone (if there are multiple AppleTalk
zones).
5.
Select the Tektronix printer and click OK.
6. At the prompt Do you want to capture this AppleTalk Printing
Device?, click No.
Note Clicking Yes hides the printer from regular Macintosh users, forcing
them to use NT Server as a spooler, as long as NT Server allows
sharing of this printer.
7. Click OK to complete the installation.
Installing the Printer and Drivers
Service Manual
2
2-35