Cleaning - Tektronix Phaser 360 Service Manual

7
Cleaning and Maintenance

Cleaning

7-2 Phaser 360 Color Printer
Supplies required
Phaser 360 cleaning tray
Foam swabs
Caution
Do not use rubbing alcohol because it can contain water and oils
that leave undesirable residue on the printer parts. Never use
water to clean the printer's internal components.
Appropriate cleaning procedures, as listed in the following tables, should be
performed when specific print-quality or paper transport problems occur. All
cleaning procedures are detailed in the Phaser 360 User Manual .
Light stripes or missing colors
Problem type
Missing or light-colored
stripes on prints.
Ink smears, oil spots or random ink streaks
Problem type
Ink smears on the front,
back or edges of a page.
Oil (drum fluid) on top
edge of print.
Media jams
Problem type
Paper-pick or jamming
problems at the tray.
Paper jamming problems
at the front door.
Paper- jamming
problems at the exit.
Alcohol-dampened cloth
90% pure isopropyl alcohol
Solution
Select the automated procedure Clean: Light
stripes from the front panel Clean menu.
Solution
Select the automated procedure Clean: Ink smears
from the front panel Clean menu.
Check the drum maintenance tray for ink and
paper-dust build-up on the wiper blade or the wick.
Select the automated procedure Clean: Ink smears
from the front panel Clean menu.
Solution
Select the automated procedure Clean: Media tray
jams from the front panel Clean menu.
Clean the transport rollers. Ensure the drum
maintenance tray is correctly installed.
Clean the exit rollers and the stripper fingers