Solenoid valve
Tools required
Magnetic screwdriver
T-20 TORX tip
T-15 TORX tip
1.
Turn off the printer and remove the power cord.
2.
Remove the top and right-side covers as explained in the earlier topic,
"Cabinet panels and covers" on page 8-4.
3.
Disconnect the wiring harnesses leading to the solenoid valve from
I/O board 3.
4.
Disconnect the vacuum hoses leading to the solenoid valve.
5.
Remove the two screws securing the solenoid valve in place. Remove
the solenoid valve.
Field Replaceable Unit Disassembly/Assembly
Service Manual
8
8-13