Ethernet Card Installation (4686Fp1; Card Part Number 671-3357-00) - Tektronix Phaser 140 Instruction Sheet

Phaser 140 Service Supplement
Ethernet card installation (F-kit 4686FP1; card part number 671-3357-00)
This instruction sheet provides details for installing an Ethernet card onto the
printer's image processor board. The installed Ethernet card gives the printer
the ability to communicate on EtherTalk and Novell networks. To enable the
card for TCP/IP network communication (a separately purchased
customer-installable option — order kit 4680FP2). After installing the Ethernet
card, refer to the topic "Enabling TCP/IP with the downloadable software key"
at the end of these instructions.
The software included with this upgrade is expressly incorporated in the
License Agreement for Software and Typefont Data shipped with your Tektronix
printer.
Static electricity precautions
Leave the printer plugged into its power outlet. This preserves a
ground path for static discharges.
Touch the printer's bare metal frame often to discharge static
electricity from your body.
Handle the circuit board(s) by their edges only.
Do not lay the board(s) on a metal surface.
Make the least possible movements to avoid generating static
electricity.
Avoid wearing wool, nylon or polyester clothing; they generate static
electricity.
20