Ricoh B230 Service Manual page 551

001 Condition
002 Detection Times
003 Print Page After Near Full
Pixel Count After Near
004
Full
Pixel Count After
005
Replacement
008 Coefficient
011 Notice Setting
[Toner Collection Bottle Full Detection]
3900
Turns toner collection bottle full detection on or off.
001 ON/OFF Setting
[New PCU Detection]
3901
Turns new PCU detection on or off.
001 ON/OFF Setting
SM
*CTL [0 to 4 / 0 / 1 /step]
*CTL [0 to 50 / - / 1 /step]
*CTL [0 to 1000 / 0 / 1 sheet/step]
*CTL [0 to 200000 / - / 1 cm
Displays the pixel counter after
*CTL replacement of toner collection bottle.
[0 to 200000 / - / 1 cm
*ENG [0.5 to 1.5 / 1 / 0.1 /step]
Enables or disables the calling for NRS.
[0 or 1 / 1 / - ]
0: Enable NRS calling
1: Disable NRS calling
NOTE:
*ENG If the toner collection bottle has been
replaced before the machine detects used
toner near full when this setting is set to "0",
the machine cannot detect toner collection
bottle near full. In that case, set
SP3-902-017 to "1".
[0 or 1 / 1 / - ]
*ENG
0: OFF, 1: ON
*ENG [0 or 1 / 1 / - ]
5-185
2
/step]
2
/step]
B230/B237