Exposure Lamp Stabilizer; Front Scanner Wire - Ricoh B230 Service Manual

SP4–688 (DF: Density Adjustment): Use this to adjust the density level if the ID of
outputs made in the DF and Platen mode is different.

3.5.6 EXPOSURE LAMP STABILIZER

1. Rear cover ( "Rear Cover")
2. Exposure lamp stabilizer [A] (

3.5.7 FRONT SCANNER WIRE

1. Exposure glass (
2. Front frame ( "Exposure Lamp")
3. Front scanner wire clamp [A]
4. Front scanner wire bracket [B] (
5. Front scanner wire and scanner drive pulley [C] (
SM
x 2, x 2)
"Exposure Glass")
x 1)
3-23
x 1)
B230/B237