Ricoh B230 Service Manual page 592

[By-Pass Length
5150
Setting]
Determines whether the transfer sheet from the by-pass tray is used or not.
001 Normally the paper length for sub scanning paper from the by-pass tray is
limited to 600 mm, but this can be extended with this SP to 1260 mm.
5162 [App. Switch Method]
001 This program specifies the switch that selects an application program.
[Fax Printing Mode at Optional]
Enables or disables the automatic print out without an accounting device. This
5167
SP is used when the receiving fax is accounted by an external accounting
device.
Fax Printing Mode at
001
Optional Counter Off
[CE Login]
5169
If you will change the printer bit switches, you must 'log in' to service mode with
this SP before you go into the printer SP mode.
001 CE Login
[Copy Data Security Setting]
5178
Do this SP after installation of the Copy Data Security Unit.
001 -
B230/B237
*CTL [0: OFF/ 1: ON]
*CTL [0: Soft Key Set/ 1: Hard Key Set]
[0 or 1 / 0 / - ]
*CTL 0: Automatic printing
1: No automatic printing
[0 or 1 / 0 / - ]
*CTL 0: Disabled
1: Enabled
[0 or 1 / 0 / 1/step]
*ENG 0: Copy data security function disabled
1: Copy data security function enabled
5-226 SM