Ricoh B230 Service Manual page 610

completed, but an certification error has been received, and the rescue
certification is being recorded.
The rescue certification of No. 17 has been recorded, and the GW URL
18
is being notified of the failure of the certification update.
CERT: Error
Displays a number code that describes the reason for the request for update
of the certification.
0 Normal. There is no request for certification update in progress.
Request for certification update in progress. The current certification
1
has expired.
068
An SSL error notification has been issued. Issued after the certification
2
has expired.
Notification of shift from a common authentication to an individual
3
certification.
4 Notification of a common certification without ID2.
5 Notification that no certification was issued.
6 Notification that GW URL does not exist.
069 CERT: Up ID
083 Firmware Up Status
084 Non-HDD Firm Up
085 Firm Up User Check
B230/B237
The ID of the request for certification.
Displays the status of the firmware update.
This setting determines if the firmware can be
updated, even without the HDD installed.
0: Not allowed update
1: Allowed update
This SP setting determines if the operator can
confirm the previous version of the firmware before
the firmware update execution. If the option to
confirm the previous version is selected, a
notification is sent to the system manager and the
5-244 SM