Ricoh B230 Service Manual page 979

Code Meaning
15-61 Attachment File Format
Error
15-62 TIFF File Compatibility
Error
15-63 TIFF Parameter Error
15-64 TIFF Decompression Error The file received as an attachment caused the
15-71 Not Binary Image Data
15-73 MDN Status Error
15-74 MDN Message ID Error
15-80 Mail Job Task Read Error
15-81 Repeated Destination
Registration Error
15-91 Send Registration Error
SM
Suggested Cause/Action
The attached file is not TIFF format.
Could not receive transmission due to:
Resolution error
Image of resolution greater than 200 dpi
without extended memory.
Resolution is not supported.
Page size error
The page size was larger than A3.
Compression error
File was compressed with other than MH, MR,
or MMR.
The TIFF file sent as the attachment could not be
received because the TIFF header is incorrect:
The TIFF file attachment is a type not
supported.
The TIFF file attachment is corrupted.
Software error.
TIFF decompression error:
The TIFF format of the attachment is
corrupted.
Software error.
The file could not be received because the
attachment was not binary image data.
Could not find the Disposition line in the
header of the Return Receipt, or there is a
problem with the firmware.
Could not find the Original Message ID line in
the header of the Return Receipt, or there is a
problem with the firmware.
Could not receive the transmission because
the destination buffer is full and the
destination could not be created (this error
may occur when receiving a transfer request
or a request for notification of reception).
Could not repeat receive the transmission
because the destination buffer is full and the
destination could not be created (this error
may occur when receiving a transfer request
or a request for notification of reception).
Could not receive the file for transfer to the final
destination:
The format of the final destination or the
29
Error Codes
B786