Ricoh B230 Service Manual page 631

Search Option
This SP uses bit switches to set up the fuzzy search options for the UCS local
address book.
Bit: Meaning
060
0: Checks both upper/lower case characters
1: Japan Only
2: Japan Only
3: Japan Only
4 to 7: Not Used
Complexity Option 1
Use this SP to set the conditions for password entry to access the local
address book. Specifically, this SP limits the password entry to upper case
and sets the length of the password.
062
[0 to 32 / 0 / 1 /step]
This SP does not normally require adjustment.
This SP is enabled only after the system administrator has set up a
group password policy to control access to the address book.
063 Complexity Option 2 DFU
064 Complexity Option 3 DFU
065 Complexity Option 4 DFU
091 FTP Auth Port Setting
094 Encryption Stat
SM
After you do this SP, go out of the SP
mode, and then turn the power off.
Do not remove the SD card until the
Power LED stops flashing.
Specifies the FTP port for getting a
distribution server address book that is used
in the identification mode.
[0 to 65535 / 3671 / 1 /step]
Shows the status of the encryption function
for the address book data.
5-265 B230/B237