Ricoh B230 Service Manual page 329

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Delete All error 2: Data area
An error is detected while all of the HDD or NVRAM are formatted
CTL
logically by the Data Overwrite Security Unit (B735).
875
D
The logical format for the HDD fails.
1. Turn the main switch off/on and try the operation again
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
Log Data Error
CTL An error was detected in the handling of the log data at power on or
876
D during machine operation. This can be caused by switching the
machine off while it is operating.
Log Data Error 1
-001
Damaged log data file in the HDD
1. Initialize the HDD with SP5832-004.
Log Data Error 2
An encryption module not installed
-002
1. Disable the log encryption setting with SP9730-004 ("0" is off.)
1. Install the DESS module.
Log Data Error 3
Invalid log encryption key due to defective NVRAM data
-003
1. Initialize the HDD with SP5832-004.
2. Disable the log encryption setting with SP9730-004 ("0" is off.)
-004 Log Data Error 4
Unusual log encryption function due to defective NVRAM data
SM 4-89 B230/B237