Ricoh B230 Service Manual page 645

[Stamp Position Adj.] Fax Stamp Position Adjustment
6010
Adjusts the horizontal position of the stamp on the scanned originals.
6010 1 Stamp Position Adj.
[Original Size Detection Priority] Original Size Detection Priority
6016
Specifies the original size for a size detected by the original sensor, since
original sensors cannot recognize all sizes.
Original Size Detection
001
Priority
[DF Magnification Adj.] DF Magnification Adjustment
6017
Adjusts the magnification in the sub-scan direction for the ARDF.
001 DF Magnification Adj.
6123 [Jogger Position Adj.]
SM
*ENG [-5.0 to 5.0 / 0 / 1 mm/step]
[0 or 1 / 0 / - ]
0: Setting 1
1: Setting 2
Setting 1Setting 2
Bit 7: A4 (L)/LT (L)
Bit 6: 11" x 15"/DLT (L)
Bit 5: DLT (L)/ 11" x 15"
Bit 4: LT (S)/ US Exec (S)
*ENG Bit 3: LT (L)/ 8" x 10" (L)
Bit 2: LG (L)/ F4 (L)
Bit 1: A4 (L)/ 16K (L)
Bit 0: 8K (L)/ DLT (L)
Bits used for detection differ depending on
destination as shown below.
Bit 7 to 6: Only for Japan
Bit 5 to 2: Only for US
Bit 1 to 0: Only for EU/AA
*CTL [-5.0 to 5.0 / 0 / 0.1 %/step]
5-279 B230/B237