10. Align the rear left corner of the platen sheet with the corner [H] on the exposure
glass.
11. Close the ARDF.
12. Open the ARDF and check that the platen sheet is correctly attached.
13. Attach the decal [I] to the top cover as shown. Choose the language you want.
14. Plug in and turn on the main power switch of the machine, and then check the
ARDF operation.
15. Make a full size copy. Check that the registrations (side-to-side and leading
edge) and image skew are correct. If they are not, adjust the registrations and
image skew referring to "Copy Adjustments" in the "Replacements and
Adjustments" section.
SM
1-27
B230/B237