Keep NVRAMs away from any objects that can cause static electricity. Static
electricity can damage NVRAM data.
Make sure the NVRAM is correctly installed on the controller board.
Make sure that the DIP-switch settings on the old controller board are the same for
the new controller board. Do not change the DIP switches on the controller board
in the field.
3.14.11 HDD
1.
Controller unit (
2.
HDD unit [A] (
3.
HDD unit upper cover [B] and lower cover [C] (
4.
HDD [D]
5.
Turn the main switch on. The disk is automatically formatted.
B230/B237
"Controller Box")
x 4,
x 2)
x 5)
3-106
SM