Ricoh B230 Service Manual page 325

No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD: Reboot error
The HDD does not become ready within 30 seconds after the power is
supplied to the HDD.
Loose connection
Defective cables
CTL
861
Defective HDD
D
Defective controller
1. Check the connection between the HDD and controller.
2. Check and replace the cables.
3. Replace the HDD.
4. Replace the controller.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD: Read error
The data stored in the HDD cannot be read correctly.
CTL
Defective HDD
863
D
Defective controller
1. Replace the HDD.
2. Replace the controller.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
HDD: CRC error
While reading data from the HDD or storing data in the HDD, data
CTL
transmission fails.
864
D
Defective HDD
1. Replace the HDD.
SM 4-85 B230/B237