1.20.11 USB HOST INTERFACE
Unplug the main machine power cord before you do the following
procedure.
1.
If the IEEE1394 unit is installed in I/F Card Slot A, remove it.
2.
Remove the slot cover [A] from I/F Card Slot A (
3.
Install the USB Host Interface [B] (Knob-screw x 2) into I/F card slot A.
4.
Make sure that the machine can recognize the option (see 'Check All
Connections' at the end of this section).
B230/B237
x 2).
1-80
SM