Ricoh B230 Service Manual page 698

If the job is cancelled while it is waiting to be sent, the job is not counted.
If the job is cancelled during sending, it may or may not be counted, depending on
what stage of the process had been reached when the job was cancelled.
Even if several files are combined for sending, the transmission counts as one job.
8 161 T:PCFAX TX Jobs
8 163 F:PCFAX TX Jobs
This counts fax jobs started from a PC using a PC fax application, and sending the
data out to the destination from the PC through the copier.
8 191 T:Total Scan PGS
8 192 C:Total Scan PGS
8 193 F:Total Scan PGS
8 195 S:Total Scan PGS
8 196 L:Total Scan PGS
SP 8 191 to 8 196 count the number of scanned sides of pages, not the number of
physical pages.
These counters do not count reading user stamp data, or reading color charts to adjust
color.
Previews done with a scanner driver are not counted.
A count is done only after all images of a job have been scanned.
Scans made in SP mode are not counted.
Examples
If 3 B5 pages and 1 A3 page are scanned with the scanner application but not stored,
the S: count is 4.
If both sides of 3 A4 sheets are copied and stored to the document server using the
Store File button in the Copy mode window, the C: count is 6 and the L: count is 6.
B230/B237
*CTL These SPs count the number of PC Fax
transmission jobs. A job is counted from when
it is registered for sending, not when it is sent.
[0 to 9999999/ 0 / 1]
*CTL
Note: At the present time, these counters
perform identical counts.
*CTL
These SPs count the pages scanned by each
*CTL
application that uses the scanner to scan
*CTL
images.
[0 to 9999999/ 0 / 1]
*CTL
*CTL
5-332 SM