locked print.
The maximum number of pages is 2,000, including jobs using locked print and
collation.
Locked Print
Using this feature, the print job is stored in the machine but will not be printed until the user
inputs an ID and a password at the machine's operation panel. These ID and password
must match the ID and password that has been input with the printer driver.
Stored data is automatically deleted after it is printed.
Stored data can be manually deleted at the operation panel.
The partition can hold up to 100 files, including files stored using sample print.
The partition can hold a log containing up to 30 errors, excluding logs stored using
locked print.
The maximum number of pages is 2,000, including jobs using sample print and
collation.
Locked print uses the same hard disk partition (16.8 GB) as sample print and collation.
Hold Print
Using this feature, the print job is stored in the machine but will not be printed until the user
inputs an ID at the machine's operation panel. This ID must match the ID that has been
input with the printer driver.
Stored data is automatically deleted after it is printed.
Stored Print/ Store and Print
Using this feature, stored files can be printed repeatedly without PC operation. Stored files
can also be printed while the controller is receiving files, even if the file data has not been
completely received.
6.14.4 JOB SPOOLING
Print data can be spooled (stored) in the machine's HDD, and the machine starts to print
when data transfer is complete. Since the machine stores all data first before printing, the
host computer is freed up more quickly.
The supported print protocols are IPP and LPR.
The default setting for this feature is "off". The user must switch it on using UP
mode to enable this feature.
The size of the HDD partition for job spooling is 1 GB.
The partition can hold up to 150 jobs.
SM
6-83
B230/B237