Ricoh B230 Service Manual page 443

[Thin: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge
2472
plate at the paper leading edge between the erase margin area and the image
area.
Paper Transfer: Plain
001
(138 mm/s): 1st Side
Paper Transfer: Plain
002
(138 mm/s): 2nd Side
Paper Transfer: FINE: 1st
003
Side
Paper Transfer: FINE:
004
2nd Side
Separation DC: Plain
005
(138 mm/s): 1st Page
Separation DC: Plain
006
(138 mm/s): 2nd Page
Separation DC: Fine: 1st
007
Page
Separation DC: Fine: 2nd
008
Page
[Thin: Trailing Edge Correction] Thin Paper: Trailing Edge Correction
Adjusts the correction coefficient to the paper transfer roller current for the
paper trailing edge in each mode. SP2453 and SP2457 are multiplied by these
2473
SP values.
The paper trailing edge area can be adjusted with SP2474.
001 Paper Transfer: Plain
SM
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG
Not used
*ENG
*ENG
[0 to 30 / 0 / 2 mm/step]
*ENG
*ENG
Not used
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
5-77 B230/B237