Ricoh B230 Service Manual page 789

4. Select the target destination where the debug information will be saved. Under
"5857 Save Debug Log", touch "2 Target", enter "2" with the operation panel key
to select the hard disk as the target destination. Then press
Select "3 SD Card" to save the debug information directly to the SD card if it is
inserted in the service slot.
5. Now touch "5858" and specify the events that you want to record in the debug
log. SP5858 (Debug Save When) provides the following items for selection.
1 Engine SC Error
2 Controller SC Error
3 Any SC Error
4 Jam
More than one event can be selected.
Example 1: To Select Items 1, 2, 4
Touch the appropriate items(s). Press "ON" for each selection. This example shows
"Engine SC Error" selected.
SM
Saves data when an engine-related SC
code is generated.
Saves debug data when a
controller-related SC Code is
generated.
Saves data only for the SC code that
you specify by entering code number.
Saves data for jams.
5-423
.
B230/B237