Ricoh B230 Service Manual page 626

[Delivery Server
Setting]
5845
Provides items for delivery server settings.
FTP Port No.
001
Sets the FTP port number used when image files to the Scan Router Server.
IP Address (Primary)
002
Use this SP to set the Scan Router Server address. The IP address under the
transfer tab can be referenced by the initial system setting.
Delivery Error Display Time
006 Use this setting to determine the length of time the prompt message is
displayed when a test error occurs during document transfer with the NetFile
application and an external device.
IP Address (Secondary)
008 Specifies the IP address assigned to the computer designated to function as
the secondary delivery server of Scan Router. This SP allows only the setting
of the IP address without reference to the DNS setting.
Delivery Server Model
Allows changing the model of the delivery server registered by the I/O device.
0: Unknown
009
1: SG1 Provided
2: SG1 Package
3: SG2 Provided
4: SG2 Package
010 Delivery Svr Capability
Bit7 = 1 Comment information exits
B230/B237
number. DFU
*CTL
-
[0 to 65535 / 3670 / 1 /step]
Range: 000.000.000.000 to 255.255.255.255
[0 to 999 / 300 / 1 second /step]
Range: 000.000.000.000 to 255.255.255.255
[0 to 4/ 0 / 1 /step]
[0 to 255 / 0 / 1 /step]
5-260
Changes the
SM