For Installing The Single G3 Board - Ricoh B230 Service Manual

G3 Interface Unit (B787)

For Installing the Single G3 Board

1. Attach the flat cable holder [A], and then hold the flat cable [B] with it as shown.
2. Attach the clamp [C] as shown.
3. Install the telephone jack [D] for G3 board (
4. Attach the G3 board [E] to the interface board [F], and then attach it to the fax
unit ( x 7).
5. Connect the telephone jack connector [G] to the G3 board [E].
6. Connect the interface board [F] to the fax controller board [H] with the flat cable
[I].
B786
x 1).
10 SM