By-Pass Paper Feed Unit - Ricoh B230 Service Manual

1. Adjust the projection [B] of the left side fence bar (it must be centered).
2. Install the by-pass paper size detection switch so that the hole [A] in this switch
faces the projection [B] of the left side fence bar.
3. Reassemble the copier.
4. Plug in and turn on the main power switch.
5. Check this switch operation with SP5803-071 (By-pass paper size < Input
Check).
- Display on the LCD -
Paper Size
A3 SEF
B4 SEF
A4 SEF

3.12.7 BY-PASS PAPER FEED UNIT

1. Open the right door.
2. Remove the by-pass tray unit gear [A] (
tray.
3. Close the right door.
SM
Display Paper Size
10010000 B5 SEF
11010000 B6 SEF
11000000 A6 SEF
x 1) and bushing [B], at the rear of the
3-93
Display
11100000
00110000
10110000
B230/B237