Fusing; Fusing Unit - Ricoh B230 Service Manual

Hide thumbs Also See for B230:

Table of Contents

3.11 FUSING

Turn off the main switch and wait until the fusing unit cools down before beginning

any of the procedures in this section. The fusing unit can cause serious burns.

If you will install a lot of new parts in the fusing unit (at PM for example), then set

SP 3902-014 to "1".

If you do this, then the machine will reset the PM counter for the fusing unit

automatically, after you turn the power on again.

Do not do this if you replace the complete fusing unit. This is because the

fusing unit has a new detection mechanism.

Turn off the main power switch.

Open the right door.

Release the lock levers [A].

Fusing unit [B]

Table of Contents