Ricoh B230 Service Manual page 615

Normally, it is best to allow unlimited time for certification and ID2 update
requests, and for the notification that the certification has been completed.
However, Cumin-M generates charges based on transmission time for the
customer, so a limit is placed upon the time allowed for these transactions.
If these transactions cannot be completed within the allowed time, do this SP
to cancel the time restriction.
175 Modem Modulation Mode Setting
FAX TX Priority
This SP determines whether pushing the off-hook button will interrupt a
Cumin-M transmission in progress to open the line for fax transaction. This
187
SP can be used only if SP5816 164 is set to "0".
[0 or 1/ 0 / - ]
0: Disable, 1: Enable
200 Manual Polling
Regist: Status
Displays a number that indicates the status of the NRS service device.
0: Neither the NRS device nor Cumin device are set.
1: The Cumin device is being set. Only Box registration is completed. In this
201
status the Basil unit cannot answer a polling request.
2: The Cumin device is set. In this status the Basil unit cannot answer a
polling request.
3: The NRS device is being set. In this status the Cumin device cannot be set.
4: The NRS module has not started.
202 Letter Number
203 Confirm Execute
204 Confirm Result
Displays a number that indicates the result of the inquiry executed with
SP5816 203.
0: Succeeded
SM
-
- Executes the manual polling.
Allows entry of the number of the request needed
for the Cumin device.
Executes the inquiry request to the NRS GW URL.
5-249 B230/B237