Settings; Before Removing The Old Pm Parts - Ricoh B230 Service Manual

2. PREVENTIVE MAINTENANCE
2.1

SETTINGS

2.1.1 BEFORE REMOVING THE OLD PM PARTS

1. Enter the SP mode.
2. Output the SMC logging data with SP5-990-004.
3. Set the following SPs to "1" before you turn the power off. Then, the machine
will reset the PM counters automatically. In the case of developer, the developer
initialization will also be done automatically.
4. Exit the SP mode.
Developer
Drum Unit
Fusing Unit Parts (not necessary for complete fusing
units; see below)
Image Transfer Belt Cleaning Unit
Paper Transfer Unit
Toner Collection Bottle (if not full or near-full)
For the following units, there is a new unit detection mechanism. It is not necessary to reset
PM counters.
PCU
Development unit
Complete fusing unit
SM
Item
2-1
SP
Black: 3902-005
Yellow: 3902-006
Cyan: 3902-007
Magenta: 3902-008
Black: 3902-009
Yellow: 3902-010
Cyan: 3902-011
Magenta: 3902-012
3902-014
3902-015
3902-016
3902-017
B230