Printer Switches - Ricoh B230 Service Manual

Bit Switches
I-fax Switch 0C - Not used (do not change the settings) [SP No. 1-102-013]
I-fax Switch 0D - Not used (do not change the settings) [SP No. 1-102-014]
I-fax Switch 0E - Not used (do not change the settings) [SP No. 1-102-015]
I-fax Switch 0F [SP No. 1-102-016]
No FUNCTION
Delivery Method for SMTP RX Files
This setting determines whether files received with SMTP protocol are delivered or
0
output immediately.
0: Off. Files received via SMTP are output immediately without delivery.
1: On. Files received via SMTP are delivered immediately to their destinations.
1-7 Not used

4.3.3 PRINTER SWITCHES

Printer Switch 00 [SP No. 1-103-001]
No FUNCTION
Select page separation marks
0 0: Off
1: On
Repetition of data when the
received page is longer than
1 the printer paper
0: Off
1: On
Prints the date and time on
received fax messages
2
0: Disabled
1: Enabled
B786
COMMENTS
COMMENTS
0: If a 2 page RX transmission is split, [*] is
printed in the bottom right corner of the 1st page
and only a [2] is printed in the upper right corner
of the 2nd page.
1: If a 2 page RX transmission is split into two
pages, for example, [*] [2] is printed in the bottom
right corner of the 1st page and only a [2] is
printed in the upper right corner of the 2nd page.
This helps the user to identify pages that
have been split because the size of the
paper is smaller than the size of the
document received. (When A5 is used to
print an A4 size document, for example.)
1: Default. 10 mm of the trailing edge of the
previous page are repeated at the top of the next
page.
0: The next page continues from where the
previous page stopped without any repeated text.
This switch is only effective when user parameter
02 - bit 2 (printing the received date and time on
received fax messages) is enabled.
1: The machine prints the received and printed
date and time at the bottom of each received
page.
62 SM