Ricoh B230 Service Manual page 596

5th and 6th digits: The hour. [00 to 23]
7th digit: The length of the advanced time. [0 to 9 / 1 hour /step]
8th digit: The length of the advanced time. [0 to 5 / 10 minutes /step]
For example: 3500010 (EU default)
The timer is advanced by 1 hour at am 0:00 on the 5th Sunday in March
Rule Set (End)
Specifies the end setting for the summer time mode.
There are 8 digits in this SP. The digits are counted from the left.
1st and 2nd digits: The month. [1 to 12]
004
3rd digit: The week of the month. [0 to 5]
4th digit: The day of the week. [0 to 7 = Sunday to Saturday]
5th and 6th digits: The hour. [00 to 23]
The 7th and 8 digits must be set to "00".
5401 [Access Control]
When installing the SDK application, SAS (VAS) adjusts the following: DFU
⇒
103 Default Document ACL: Used to assign the default access privileges of users
to their own documents on the Document Server. 0:Read only (default) 1:edit
2:edit/delete 3:full control NOTE: Available only when using Windows / LDAP
/ Integration Server Authentication. Applies to new users only, it will not affect
existing users.
200 SDK1 Unique ID
201 SDK1 Cert Method
210 SDK2 Unique ID
211 SDK2 Cert Method
220 SDK3 Unique ID
221 SDK3 Certification
B230/B237
The digits are counted from the left.
Make sure that SP5-307-1 is set to "1".
Make sure that SP5-307-1 is set to "1".
- -
This ID is overwritten by SAS (VAS) when
*CTL
you install or uninstall the SDK application.
*CTL [0 to 255 / 0 / 1 /step]
*CTL -
*CTL [0 to 255 / 0 / 1 /step]
*CTL -
*CTL [0 to 255 / 0 / 1 /step]
5-230
Rev. 01/2007
SM