6.11.5 ENERGY SAVER MODES
Overview
When the machine is not being used, the energy saver function reduces power
consumption by decreasing the fusing temperature.
This machine has the following two types of energy saver modes:
1.
Panel-off mode
2.
Auto Off mode
These modes are controlled by the following UP and SP modes:
Panel off timer: User Tools – System Settings – Timer Setting – Panel Off Timer
Auto off timer: User Tools – System Settings – Timer Setting – Auto Off Timer
Panel Off Mode
Entering the panel off mode
The machine enters the panel off mode when one of the following is done:
The panel off timer runs out.
The Clear Mode/Energy Saver Key is held down for one second.
If the value in the panel off timer is larger than that in the auto off timer, the machine goes
into the auto off mode. At this time it does not go into the panel off mode. To make the panel
off mode effective, specify a value smaller than the values in the auto off timer.
What happens in panel off mode
When the machine is in the panel off mode, each of the fusing lamps are kept at the
B230/B237
6-70
SM