Installing a new Laser Optics Housing Unit
A new laser optics housing unit has a bracket to protect the LD units. When you
replace the laser optics housing unit, use caution.
1.
Push the new laser optics housing unit [A] slowly into the copier until the
bracket [B] bumps against the frame of the copier.
2.
Remove the bracket [B], and then push the new laser optics housing unit fully
into the copier (
x 2, All x
3.
Reassemble the machine.
After installing the new laser optics housing unit
Do the following adjustment after installing the new laser optics housing unit.
1.
Plug in and turn on the main power switch.
2.
Adjust the main scan magnification only for black (Bk).
1.
Input the standard value [A] provided with a new laser optics housing unit for the
SM
).
3-33
B230/B237