Ricoh B230 Service Manual page 170

1. Front door (
2. Image transfer belt unit (
3. All PCUs ( "PCU")
4. Put a sheet of paper (A3/DLT) inside the machine as shown and on the floor.
The sheet of paper on the floor is used in a later step.
5. Release the harness [A] from the clamp (
and then disconnect the harness.
Avoid touching these spring terminals [B].
6. Release the toner supply tube [C].
B230/B237
"Rear Cover")
"Image Transfer Belt")
x 1 for YCM,
3-42
x 3 for K) and hook,
SM