Moving The Machine; Transporting The Machine - Ricoh B230 Service Manual

Settings Relevant to the Service Contract
Change the necessary settings for the following SP modes if the customer has a service
contract.
You must select one of the counter methods (developments/prints) in accordance
with the contract (
Item SP No.
Counting
SP5-045-001
method
A3/11" x 17"
double SP5-104-001
counting
Service Tel. SP5-812-001
No. Setting through 004

1.3.5 MOVING THE MACHINE

This section shows you how to manually move the machine from one floor to another floor.
See the section "Transporting the Machine" if you have to pack the machine and move it a
longer distance.
Remove all trays from the optional paper feed unit or LCT.

1.3.6 TRANSPORTING THE MACHINE

Main Frame
1. Do SP 4806-001 to move the scanner carriage from the home position. This
prevents dust from falling into the machine during transportation.
2. Remove the toner cartridges. This prevents toner flow into the toner supply tube,
B230/B237
SP5-045-001).
Function
Specifies if the counting method used in
meter charge mode is based on
developments or prints. NOTE: You can
set this one time only. You cannot
change the setting after you have set it
for the first time.
Specifies whether the counter is
doubled for A3/11" x 17" paper. When
you have to change this setting, contact
your supervisor.
5812-002 programs the service station
fax number. The number is printed on
the counter list when the meter charge
mode is selected. This lets the user fax
the counter data to the service station.
1-14
Default
"0":
Developments
"No": Single
counting
SM