Ricoh B230 Service Manual page 50

5. Remove tray 2 of the machine.
6. Fasten the spring washer screw [D], using the cutout in the securing bracket [E]
as a tool.
7. Reinstall tray 2.
8. Attach the securing brackets [E] (M4x10
One of the securing brackets is used as a securing tool (the cutout [F] is used
in step 6). But the cutout [G] is for attaching the tray heater. Therefore, attach
the securing brackets [E] after installing the tray heater if you will install the
tray heater.
B230/B237
x 1 each).
1-18 SM