Ricoh B230 Service Manual page 47

which is caused by vibration during transport. This can also cause the tube to
be clogged with toner.
3. Make sure there is no paper left in the paper trays. Then fix down the bottom
plates with a sheet of paper and tape.
4. Empty the toner collection bottle. Then attach securing tape to stop the toner
bottle from coming out.
5. Do one of the following:
Attach shipping tape to the covers and doors.
Shrink-wrap the machine tightly.
After you move the machine, Make sure you do the "Auto Color Registration" as
follows. This optimizes color registration.
1. Do the "Forced Line Position Adj. Mode c" (SP2-111-3).
2. Then do the "Forced Line Position Adj. Mode a" (SP2-111-1).
To check if SP 2-111-1 was successful, watch the screen during the process. A
message is displayed at the end. Also, you can check the result with SP
2-194-10 to -12.
Make sure that the side fences in the trays are correctly positioned to prevent color
registration errors.
1000-sheet Booklet Finisher
Before the 1000-sheet booklet finisher is transported, move the shift tray to the shipping
position with SP6137-003 ("ON"), and then remove the shift tray cover.
SM 1-15 B230/B237