Led Print Head; Jcop - Muratec F-360 Field Engineering Manual
Facsimile system
Hide thumbs
Also See for F-360:
- Operating instructions manual (142 pages) ,
- Quick reference manual (16 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
LED PRINT HEAD
1. Open the printer cover.
2. Remove the E-rings on both sides and pull out the LED print head. Disconnect two connectors.
LED print head
JCOP
1. Open the Side cover.
2. Disconnect the connector of the JCOP
3. Remove the Sensor stopper film.
4. Release the tab of the JCOP, and then remove the JCOP.
JCOP
Sensor stopper film
5-43
Advertisement
Chapters
Table of Contents
