Installing The Internet Fax Board (Attach The If-300 To The Machine Which Is Installed The Op-150 And Al-200.) - Muratec F-360 Field Engineering Manual

Installing the Internet Fax board
Attaching the IF-300 to the machine which has installed an OP-
150(PCL Option) and an AL-200(Second Line Option).
Note: Make sure to turn off the fax machine before proceeding the following steps.
1. Remove the module cover of the AL-200.
2. Disconnect the connection cable of the AL-200 from the IN connector on the AL-200 PCB. Then
connect the connection cable of the IF-300 into IN connector.
3. Attach the bottom chassis of the IF-300 to the AL-200's bottom chassis, as shown below.
6-42