Internet Fax Service Mode (Tbd!) - Muratec F-360 Field Engineering Manual

3.21 Internet Fax Service mode
This mode is used only when the optional Internet fax kit has been installed.
This mode provides the following four items:
• All clear of the information in the optional Internet fax board
• Clear the Administrator's information
• Display the sum-check of the internet fax board
• Send e-mail for user registration
3.21.1 Clear the information in the optional Internet fax board
To clear the Internet fax settings:
1. Press MENU, *, 2, 4.
2. Select "Backup Data Clear" using the cursor key, then press ENTER.
3. To clear the all information of the Internet fax setting, press [Yes].
If you want to cancel this operation, press [No].
4. To reflect the setting, turn the power off, and then turn on.
Note: You can clear this message by pressing [OK], however the setting is not reflected until to the power
is turned off and on.
Note: When you performed the All RAM clear (see page 3-102) or User data clear (see page 3-102), the
information of Internet fax board will be cleared. So, after doing them, turn the power off and on to
reflect the clearing.
3-126