Muratec F-360 Field Engineering Manual page 290

Unique Switch 83 - Operation
Initial
Switch
Setting
Factory use only
7 0
Factory use only
6 0
Factory use only
5 0
Factory use only
4 0
Factory use only
3 0
Factory use only
2 0
Display the phone line
number
0: No
1: Yes
1 1
Factory use only
0 0
Adjust
Determine if the machine displays the phone line
number and its status during the fax communication
when the optional second phone line kit (AL-200)
has been installed.
When this switch is set to "1", the machine displays
phone line number and its status on the right upper
corner of the LCD.
For example, the machine is transmitting using the
first phone line and it is receiving using the second
phone line, "L1:Tx" and
alternately on the right upper corner of the LCD.
21
Usage/Comments
"L2: Rx" are displayed