Muratec F-360 Field Engineering Manual page 241

13. Reattach the Shield plate and attach the ground wire.
14. Pass the connection cable and the ground wire through the hole of the rear cover.
14. Connect the speaker connector, and then use the five screws to re-attach the rear cover.
15. Re-attach two ground wire to the Second phone line module's bottom chassis.
Plug the connection cable from the main PCB into the IN connector on the Second phone line module's
Modem PCB. And plug the connection cable of the OP-150 to the OUT connector on the Second
phone line Modem PCB.
6-16