Set Life Monitor Passcode - Muratec F-360 Field Engineering Manual

3.17 Set life monitor passcode

This is the passcode that protects the life monitor clear operation. If it is not necessary to protect the life
monitor clear operation, abort this operation without entering the life monitor passcode.
To create the passcode:
1. Press MENU, *, 1, 9.
2. Enter the passcode using the numeric keypad, and then press ENTER.
To modify the existing passcode:
1. Press MENU, *, 1, 9. The machine asks you to enter the current passcode.
2. Enter the current passcode correctly.
If you have entered the correct passcode, the LCD will show:
3. Enter the new passcode using the numeric keypad, and then press ENTER.
To turn off the protection passcode:
1. Press MENU, *, 1, 9. The machine asks you to enter the current passcode.
2. Enter the current passcode correctly.
If you have entered the correct passcode, the LCD will show:
3. Enter the 0000 (four zeros), and then press ENTER.
3-121