Solenoid; Rx Motor - Muratec F-360 Field Engineering Manual

SOLENOID

1. Remove the REAR COVER. (See page 5-7.)
2. Remove the CONNECT PRINTER PCB. (See page 5-17.)
3. Remove the SOLENOID mounting screw, and then remove the SOLENOID.
Solenoid

RX MOTOR

1. Remove the REAR COVER. (See page 5-7.)
2. Remove the CONNECT PRINTER PCB. (See page 5-17.)
3. Remove the PSU. (See page 5-16.)
4. Remove four RX MOTOR mounting screws, and then remove the RX MOTOR.
Rx motor
5-34