Muratec F-360 Field Engineering Manual page 123

Unique Switch 95 - Miscellaneous
Initial
Switch
Setting
7 0 Not used
Display count down
6 0 0: No
1: Yes
5 1 Factory use only
4 0 Factory use only
3 0 Factory use only
Priority of printing the check
message on A5(Portrait)
2 0
0: No
1: Yes
1 0 Paper size of F4-sized paper
0 0
Unique Switch 96 to 99 - Miscellaneous
Initial
Switch
Setting
Factory use only
7 0
Factory use only
6 0
Factory use only
5 0
Factory use only
4 0
Factory use only
3 0
Factory use only
2 0
Factory use only
1 0
Factory use only
0 0
Adjust
When set to "1", the machine will display drum and
toner count down when they are at the end of their
supply cycle.
When set to "1", A5(Portrait) sized paper will be
given priority to print the check message.
Set the paper size of F4-sized paper.
Switch 1 0 Paper size (Width × Length)
Adjust
3-98
Usage/Comments
0 0 210 mm × 330 mm (Initial setting)
0 1 216 mm × 342 mm
1 0 216 mm × 353 mm
Usage/Comments