Muratec F-360 Field Engineering Manual page 289

Unique Switch 56 - Printer
Initial
Switch
Setting
Not used in F-320
7 0 Regards A3-sized document
as 11x17 sized document
Not used in F-320
Enable to image rotate
6 0
reception with the Half-letter
sized paper.
Not used
5 0
Not print when the paper for
separator page is not in the
selected paper cassette
0: Print without Separator
4 0
1: Not print
Not used
3 0
Select paper when one
received document will be
printed on more than one
page.
2 1
Factory use only
1 0
Factory use only
0 0
Adjust
page
Usage/Comments
Determine the machine's action in the following
condition of "Separator page" feature:
There is no paper for "separator page" in the
selected paper cassette.
When set to "1", the machine will not print the
received document until the paper for separator
page is supplied in the selected paper cassette.
When set to "0", the machine ignore the Separator
page feature setting for this reception.
For example: The machine received the legal-sized
document with the following condition:
Receive reduction rate is 100%
The machine has Letter-sized and half letter sized
paper in the paper cassette.
when set this switch to "1", the machine will print
the received legal-sized document on two letter-
sized paper.
when set this switch to "0", the machine will print
the received legal-sized document on three half
letter sized paper.
20