Muratec F-360 Field Engineering Manual page 106

Unique Switch 56 - Printer
Initial
Switch
Setting
Regards A3-sized document
as 11x17 sized document
7 0
0: Yes
1: No
Enable to image rotate
reception with the Half-letter
6 1 sized paper.
0: No
1: Yes
Not used
5 0
Do not print when the paper
for separator page is not in
the selected paper cassette
0: Print without Separator
page
4 0
1: Not print
Not used
3 0
Select paper when one
received document will be
printed on more than one
page.
2 1
Factory use only
1 0
Factory use only
0 1
Adjust
Determine if the machine regards the A3-sized
document as 11x17 size document when it receives
an A3–sized document.
(for U.S. model only)
Determines if the rotate reception is active with the
half-letter sized paper.
(for U.S. model only)
Determines the machine's action in the following
condition of "Separator page" feature:
There is no paper for "separator page" in the
selected paper cassette.
When set to "1", the machine will not print the
received document until the paper for separator
page is supplied in the selected paper cassette.
When set to "0", the machine ignores the Separator
page feature setting for this reception.
For example: The machine receives a legal-sized
document with the following condition:
Receive reduction rate is 100%
The machine has Letter-sized and half letter sized
paper in the paper cassettes.
When setting this switch to "1", the machine will
print the received legal-sized document on two
letter-sized paper.
When this switch is set to "0", the machine will print
the received legal-sized document on three half
letter sized paper.
3-81
Usage/Comments